A heavy machine move rarely goes wrong on the road – far more often it goes wrong in the preparation. Missing details, a machine that turns out taller than expected, a site the vehicle can't reach. In this checklist we've gathered everything the machine owner or shipper should review in advance, so the machine leaves on the planned day without a hitch.
Contents
- What information will we need?
- Which low-loader suits your machine?
- The loading and unloading sites
- Preparing the machine before departure
- Loading and securing
- Documents, liability, insurance
- What determines the price?
- The checklist in one place
What information will we need?
For an accurate quote and for the permits, we need the machine's details in its transport configuration – not necessarily the figures in the brochure.
- Make and model – often this alone tells us which low-loader is needed.
- Length, width and height in transport configuration: boom lowered, bucket in, mirrors folded, steps raised.
- Weight including attachments: counterweight, bucket, adapter, fuel.
- Is the machine self-propelled, and will it be in working order at the time of loading?
- Lashing points – whether there are any and where they are.
- Exact loading and delivery addresses, the preferred date, and the phone number of an on-site contact.
- 1–2 photos of the machine – a great help in choosing the trailer and planning the securing.
You can send all of this in one go using our quote request form, photos included.
Which low-loader suits your machine?
- Ramp trailer (beavertail low-loader): for self-propelled machines (tractors, loaders, excavators) that drive on under their own power.
- Low-bed (well) trailer: for tall machines (lifts, larger plant), because the low deck keeps the overall height of the combination down.
- Flatbed (mega) trailer: for long, bulky loads, steel structures and formwork.
You'll find the exact loading dimensions of our low-loaders on our oversized transport page, where a quick checker also shows which one your machine is likely to fit on.
The loading and unloading sites
A low-loader combination can be 18–20 m long and needs a wide turning circle. It pays to think ahead:
- Will the combination fit through the entrance and gate, and along the roads within the site?
- Is the ground firm and level enough for loading? In wet weather, an unsurfaced area can become unusable.
- Are there any low cables, overhanging branches or access restrictions (a weight-restricted bridge, a built-up area)?
- Is a crane or forklift needed for a non-self-propelled load, and who will provide it?
- Will there be a machine operator on site to drive the machine on and off?
Preparing the machine before departure
- Boom, bucket and attachments should be in the transport position, with moving parts secured.
- Loose parts and tools should be removed or secured – they can fall off on the road.
- Doors, windows and service covers closed; hand over the key as agreed.
- Check for any oil or fuel leaks.
- The machine should be clean – mud and soil can drop onto the road and can hide the lashing points.
- If the machine has any existing damage, photograph it before handover.
Loading and securing
Self-propelled machines drive up a ramp or the ramps of the low-bed trailer; non-self-propelled loads are lifted onto the deck by crane or forklift at the shipper's site. Proper load securing (chains, tensioners, anti-slip mats) is the haulier's responsibility – and knowing the lashing points and the centre of gravity is especially important here. That's why it helps if the machine operator is also present during loading.
Documents, liability, insurance
- On international journeys the consignment travels with a CMR consignment note, which records the condition of the load at collection and at delivery.
- Keep the machine's paperwork to hand (invoice, delivery note and, for destinations outside the EU, customs documents if required).
- Under the CMR Convention, the haulier's liability on international journeys is limited to an amount based on the weight of the load, which for a high-value machine can be far less than the machine is worth. For a high-value machine it's worth taking out separate goods-in-transit insurance – we can help with this, too.
What determines the price?
The key factors are the distance, the machine's size and weight, the type of low-loader required, permits and escort, and any crane loading or storage. For short-distance machine moves, a minimum or call-out charge is common. You'll find indicative prices and details of our charges in the FAQ, and we've written in detail about the permit rules here: Oversized loads: permits, escorts and lead times.
The checklist in one place
- Make, model, 1–2 photos
- Dimensions in transport configuration (length, width, height)
- Actual weight including attachments
- Self-propelled? In working order? Will an operator be present?
- Loading and delivery addresses, date, on-site contact
- Entrance, ground conditions and obstacles on site
- Crane / forklift needed? Who provides it?
- Machine in transport position, loose parts secured, no leaks
- Existing damage photographed
- Documents and, if needed, goods-in-transit insurance
Once you've got these covered, most of the job is already done – we take care of the rest, from choosing the low-loader to permits and escort. Request a quote for heavy machinery transport »
